Smart Baits Quick Start Guide
01 Adjust the Swing Arm
Set the arm horizontally.
02 Insert into Fish Belly
Place it in the correct direction.
03 Check Movement
Make sure the swing motion works properly.
04 Hook & Fish
Attach your hook and start fishing.
Smart Bait Care & Maintenance
01 Open & Rinse
Open the top cover and rinse the internal parts to remove bait residue.
02 Clean the Shell
Wipe the exterior with a soft cloth and mild detergent, especially the metal contacts.
03 Brush the Mechanism
Clean the lower shaft in water to remove sand and debris affecting movement.
04 Maintain Charging Contacts
Clean metal contacts regularly to ensure stable charging performance.
05 Dry Before Charging
Make sure all contact points are completely dry before charging.
VersaPump Mode Setup Guide
Fully Submersible Mode
Connect the hose to VersaPump and attach the float to the other end.
Attach the air stone, then fully submerge the aerator in water.
Clip-On Aeration Mode
Connect the hose between the air stone and VersaPump.
Clip the aerator onto the container and place the air stone into the water.
Vacuum Sealing Mode
Attach VersaPump to the vacuum suction cup.
Align it with the valve on the vacuum bag and start sealing.
Smart Fishing Light Quick Start Guide
01 Turn On the Light
Press and hold the touch button to power on the fishing light.
02 Select Light Mode
Slide the switch to choose the right lighting mode for your fishing needs.
03 Attach & Start Fishing
Set up your fishing rig correctly and get ready for a better fishing experience.
Other Resources
- Choosing a selection results in a full page refresh.